(M) seleco svd 800hd

Keskustelu osiossa 'Videotykit ja -projektorit' , aloittajana jonne.v, 14.06.2012.

  1. jonne.v

    jonne.v Guest Guest

    Liittynyt:
    13.06.2012
    Viestejä:
    4
    Saadut tykkäykset:
    0
    eli tollanen selecon svd 800 hd tykki olis kaupan tykki on hyvässä kunnossa . sekä putket ovat hyvässä kunnossa. mukaan saa tietty virtajohdon, vga piuhan , sekä vga to hdmi johdon, laite painaa about 35kg niin mielellään nouto. matkahuollolla mahdollista lähettää silloin kulut puoliksi. tossa olis tykistä infoa



    Technical information

    PROJECTION
    CRTs: 3 x selected 7" CRTs, liquid cooled, high brightness/resolution, impregnated cathode for longer life (average life: more than 10.000 hours)
    Lenses: HD 145, high definition fully colour-corrected by multilayer coating. Main lens quartz glass. Focal length 135 mm. F number f/1.03. Focus adjustments for the centre and borders. Optical resolution more than 10 lp/mm at 50% MTF
    Brightness: 1050 peak-white lumens
    Picture size: 60"-300" diagonal (factory preset 90"), 122-609cm screen width
    Installation: rear or front projection; either floor or ceiling mounted (ceiling bracket supplied)

    ELECTRONICS
    Horizontal scan frequency: 15-72 KHz autolock
    Vertical scan frequency: 45-150 Hz autolock
    Bandwidth: 75 MHz - 3dB
    Resolution: Video input more than 1000 TV lines, RGB input: 1280 x 1024 pixels, HDTV input 1920x1080 pixels
    Flyback time: Horizontal: 2.4 µs typ; Vertical: 150 µs typ
    Colour temperature: 3200-6500-9300°K plus one user choice. White uniformity: better than 8% with ANSI method colour temperature
    Colour system: PAL, SECAM, NTSC 4.43, NTSC 3.58 automatically switched
    Electronic Improvements DTI and CTI always active; noise reduction ON/OFF selection; sharpness control; comb filter ON/OFF selection; Luma-Chroma delay adjustment; hue adjustment for NTSC; 4/3, 16/9 and wide aspect ratio selectable by remote control
    Memory manager: all projector parameters can be saved, selected, copied and moved in up to 40 different labelled configurations
    Picture Data Memo Contrast, brightness, colour saturation, hue and colour temperature can be saved on each memory bank
    Test signals: 8 internal test patterns (Crosshair, Cross hatch coarse and fine, Dots, H pattern, All white, Colour bars, White window)
    Miscellaneous: automatic daily switch on and off; global working time, tubes working time; built-in clock

    INPUTS/OUTPUTS
    RGB/YCrCb Input: 5 x gold-plated BNCs (RGB, Sync.H/V+CVBS, Sync. V); YCrCb input via 3 gold-plated BNCs (Y/Y+sync, R-Y, B-Y, H-H/V Sync + CVBS, V sync)
    VGA input: D-sub 9 pin (input is compatible with most popular standards like: IBM VGA, Super VGA, XGA, etc.)
    Video input: CVBS 1 via gold-plated BNC connectors, CVBS 2 via gold-plated BNC connectors, S-VHS 1 via 4-pin mini DIN, S-VHS 2 via 4-pin mini DIN
    Serial interface: Via D-sub 15 pin (RS422 - RS232)
    Video output: 5 x gold-plated BNC (Y, R-Y, B-Y, Sync. H/V + CVBS, Sync. V) or S-VHS 4-pin mini DIN
    Output voltage: 12 Volt (10 mA max) on Pin jack when the projector is on + 12 Volt (10 mA max) on Pin jack when small format (16:9, etc. ) is selected

    GENERAL
    Input voltage: 120 - 240 Vac, 48/62 Hz
    Power consumption: 500Watt
    Dimensions (WxHxD): 620 x 340 x 700 mm
    (24,4 x 13,3 x 70,0 inches)
    Packaging Dimensions (WxHxD): 806 x 515 x 886 mm
    (31,7 x 20,2 x 34,8 inches)
    Net weight: 58,5 Kg (129 lbs)
    Shipping weight: 70 Kg (154 lbs)
    Safety: According to EN60950
    Operative function conditions: Operation temperature between 0°C and 35°C, relative humidity from 0 to 90% not condensed