Uutta prosessoria pukkaa: http://www.anchorbaytech.com/products/systems/iscanduo.php - kunnon 1U rack design - 2 HDMI out - 8 HDMI in - kaksi 12V triggeriä - mosquito noice etc etc Hieno peli.
Tämä vaikuttaa hyvin kiintoisalta laitteelta ja nyt uusimpien softapäivityksien mukana CMS (primary colors). Itselle sopis tälläinen aikasta hyvin vai onko näitä kohtaan kiinnostus tippunut kokonaan. Itse kiehtoo myös käytön helppous, Edgeen en käytännössä koske ikinä. ----------------------------------------------------------------------- What's new in iScan Duo Firmware v2.0 compared to v1.01? * New features: * Color Management System * Support for Audio only optical and coax sources * HDCP is enabled on the output only if input is encrypted * New automation commands * Bug fixes * Some audio formats were not supported with some AVRs because of EDID limitation. * HDMI audio output may not come out of reset properly. * AVI InfoFrame of Audio HDMI output may not correctly reflect the video format. * Audio delay was not correctly adjusted for progressive formats with Game Mode turned on. * Switching to DSD audio input could cause the output to remain muted. This firmware includes all previous additions and fixes ------------------------------------------------------------------------- iScan Duo software releases Firmware v2.10 (beta) Release date: May 20, 2010 What's new in iScan Duo Firmware v2.10 compared to v2.0? * New features: * CMS Bypass and User Chromaticity controls * Input settings are now save per supported format * Y/C Delay and CUE Correction controls * Input Color Space, Input Colorimetry and Input HDCP controls * Menu Timeout control to adjust the duration for on-screen menu to be displayed * Border, Mask and Output HDCP controls * New automation commands * Improvements * 16X Zoom * More information on Info screen including Auto output format and sync type indicators * Front Panel displays firmware version number page in About info screen. * Added 1080p30 pre-defined output format * Hardware handshake support for serial automation * Bug Fixes * Video input indicator sometimes remained on the screen * Gamut settings did not get saved in standby * HDCP output may cause some displays to not show an image * RGBS auto switching did not work. * OSD corruption may be observed when changing inputs from menu * Added 1080p30 pre-defined output format * Menu navigation string may crash the system for some output resolutions
Onko mitään ongelmia laitteen kanssa? Toimiiko dual out hyvin, ilmeisesti ei kuitenkaan yhtäaikaa? Oletko kokeillut cms:ässää? Profilointi onnistuu eli tietty input valitsee tietyn outputin?
Eipä ongelmia ja dual output toimii juuri noin, ja haistelee onko kytketty mitään. CMS on vielä jäänyt, mutta kyllä on "to-do" listalla. Mitäs muuta... Kake olisi voinut olla valaistu ja suurempikin, mutta menettelee. Myös nuo valikot on keskellä screeniä joka ei ole paras mahdollinen paikka... Plussana räkkikorvat tulee pakkauksessa mukana
Tähän on tullut päivitys, jossa löytyy "täysi" CMS: http://www.anchorbaytech.com/support...o_Software.php Firmware v2.20 (beta) Release date: June 26, 2010 What's new in iScan Duo Firmware v2.20 compared to v2.10? * New features: Secondary Color Gamut Controls (Cyan, Magenta, Yellow) Color Gamut Controls with Luminance adjustment Gray Scale Controls include White-point adjustments Output HDCP can now be turned off * Improvements: Ability to change output settings without a display Stop front LED from flashing when no display is connected New automation commands to support new features as well as system reset and firmware update * Bug Fixes HDMI CEC pass-through was not activated Info Screen rolled over on front panel but not on on-screen display Test Pattern on-screen indicator did not show correct test patterns when using remote short-cut buttons Serial automation command for Zoom (0x46) only accepted integer values Incorrect on-screen display for certain output resolutions Note: This firmware will force a factory default This firmware includes all previous additions and fixes Vakuuttavan tuntuinen arvostelu: http://www.chromapure.com/newgear.asp @Imfmis: Kun tilasit jenkkilästä, niin riittikö powerimuunnokseen uuden johdon ostaminen? Onko tässä ulkoinen muuntaja vai laitteen sisällä, toivottavasti sisäinen?
Pian toimii - ainakin jotenkin - 3D:llä http://www.anchorbaytech.com/products/order/pops/3D_pass.html
Firmware v2.30 (beta) Release date: Oct 27, 2010 What's new in iScan Duo Firmware v2.30 compared to v2.21? * New features: 3D Pass-through Simultaneous Dual Video Outputs Day and Night CMS profiles * Improvements: 3D Pass-through Created CMS sub-menu in the OSD to simplify menu structure Two identical displays can be connected and separately calibrated. Added a new standard output format "WUXGA@60Hz" (1920x1200). * Bug Fixes: User Preset previously affected other input presets Gray scale pattern could be set to wrong IRE level when changing from Color Gamut menu. Slightly inaccurate coefficients were used in color space conversions and non-video levels were clipped.
Onko joku muuten voinut tätä testata miten tämä toimii? Eli osaako ottaa äänet ulos 3D signaalista kuitenkin?
Firmware v2.40 Release date: December 14, 2012 What's new in iScan Duo Firmware v2.40 compared to v2.32? * New features: Added ISF Day and Night modes to the CMS menu These profiles may be locked by the ISF calibrators to prevent accidental changes to the profile settings. ISF Profiles are per output. With this new release, the iScan Duo now features four CMS profiles for each of its two outputs: Day, Night, ISF Day, and ISF Night. Added CMS Reset control which resets color gamut and grayscale settings for the currently selected CMS Profile. Bug fixes and improvements